Designed as a modular system that supports interchangeable capsules to accommodate a range of indoor and outdoor recording scenarios, the Shure VP89M medium shotgun microphone delivers a narrow 50° acceptance angle for moderate directionality with more off-axis pickup than the long VP89L. Lightweight and rugged, the VP89M provides reliable operation and low susceptibility to hum, GSM, and radio-frequency interference. The phantom-powered preamp features a switchable low-cut filter to attenuate problematic bass frequencies such as rumble and a standard XLR 3-pin output for straightforward connectivity. Outfitted with a Class-A, discrete, transformerless preamplifier, the VP89M delivers a clean and quick transient response with minimal harmonic/intermodulation distortion and no crossover distortion. Long and short capsule barrels are available separately to suit various recording needs, rejection angles, and frequency responses.
FEATURES
- For Indie Films, TV & Documentaries
- Narrow 50° Acceptance Angle
- Phantom-Powered Preamp & Medium Capsule
- Switchable Low-Cut Filter
- Class-A Transformerless Design
- Transparent, Fast Transient Response
- Minimal Harmonic and IM Distortion
- Low Susceptibility to Noise/Interference
- Windscreen Reduces Wind Noise
- Lightweight and Rugged Housing
SPECIFICATIONS
-
Microphone
- Form Factor : Stand/Boom Mount
- Sound Field : Mono
- Operating Principle : Pressure Gradient
- Capsule : 1 x Electret Condenser
- Polar Pattern : Hypercardioid, Lobar
- Orientation : End Address
- Circuitry : Solid-State
- High-Pass Filter : 200 Hz, 12 dB/Octave
- On-Board Controls : High-Pass Filter
-
Performance
- Frequency Range : 50 Hz to 20 kHz
- Maximum SPL : 132 dB SPL (1 kHz, 1% THD, 2.5-Kilohms Load) | 128.5 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
- Off-Axis Rejection : 4 dB at 60° | >15 dB at 120° | >20 dB at 180°
- Impedance : 115 Ohms
- Load Impedance : 1000 Ohms
- Sensitivity : -33.5 dBV/Pa at 1 kHz (Open Circuit Voltage, 1 kHz)
- Output Level : 4 dBV (Max)
- Dynamic Range : 117 dB (1 kHz, 2.5-Kilohms Load) | 113.5 dB (1 kHz, 1-Kilohm Load)
- Signal-to-Noise Ratio : 79 dB A-Weighted
- Equivalent Noise Level : 15 dB A-Weighted
- CMRR : 70 dB
-
Connectivity
- Output Connectors (Analog) : 1 x XLR 3-Pin Male
- Headphone Connector : None
-
Power
- Operating Voltage : 11 to 52 V (Phantom Power)
- Operating Current Consumption : 2 mA
