The JBL VMA1120 is a Commercial Series Bluetooth-enabled mixer/amplifier designed to provide flexible multi-source mixing and amplification for installation in restaurants, educational institutions, fitness centers, and retail stores. It features a 5-in/1-out mixer and 120W of output power. It can be installed in a standard 19” equipment rack with the supplied rackmount kit or set on a surface such as a desk or ledge. Stream music wirelessly via Bluetooth or connect a USB drive to the front-panel USB Type-A port. Route other sources via Euroblock, RCA, and 1/4" input jacks. The integrated mixer offers level controls as well as bass and treble for each channel. Routing to the Euroblock outputs is configurable. The VMA1120 supports voice-activated ducking and priority muting. The front-panel controls and display make operation easy, and remote volume control is possible via a JBL CSR-V module and a standard Ethernet cable (both available separately).
FEATURES
- 5-Input Mixer
- Supports USB Drives and Bluetooth
- 120W, 1-Output Amplifier
- Euroblock, RCA, and 1/4" Inputs
- Euroblock Outputs
- Per-Channel Bass and Treble Controls
- Voice-Activated Ducking
- Front-Panel Display and Controls
- Configurable Output Routing
SPECIFICATIONS
- Output Power : 120 W (per channel into 4 Ohms or 8 Ohms, 1 kHz, ≤0.5% THD)
- Insertion Loss : 70 V and 100 V Outputs: 1 dB maximum
- Input Channels : 5
- Output Channels : 1
- Tone Controls : Bass and Treble non-detented potentiometers on each channel | Bass : ±14 dB @ 50 Hz | Treble : ±14 dB @ 10 kHz
- Input Sensitivity : To obtain full rated power (load of 8 Ohms) | Mic Input: 5.5 mVrms | Line Input : 1.3 Vrms | RCA Input (Stereo In): 130 mVrms
- Frequency Response : Measured at 2.83 Vrms into rated load impedance at any output | 4/8 Ohms Output : 20 Hz to 20 kHz, ±2 dB | 70 V/100 V Outputs : 80 Hz to 15 kHz ±3 dB
- Total Harmonic Distortion (THD) : Measured at 2.83 Vrms into rated load impedance at any output | Power Amp Output
- Signal-to-Noise Ratio : >76 dB (reference rated power, mixer levels @ minimum, master volume @ maximum A-weighted)
- Input Impedance : Nominal Mic : 400 Ohms | Line : 20 kOhms (balanced) |RCA : 50 kOhms
- Phantom Power : 27 VDC
- Crosstalk : -70 dB (reference rated power, volume at mid position, 1 kHz)
- Nominal Input Voltages : Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz
- Minimum Load Impedance : Low Impedance Output : 4 Ohms | 70 V Output : 40 Ohms | 100 V Output : 80 Ohms
- Operating Temperature : 32 to 95°F / 0 to 35°C
- Humidity : 95% RH (non-condensing)
- Storage Temperature : -4 to 185°F / -20 to 85°C
- Dimensions (W x D x H) : 17 x 16.3 x 3.5" / 432 x 415 x 88 mm
