Audio Technica ATH-TWX7 True Wireless Noise Cancelling Bluetooth Earbuds

The ATH-TWX7 truly wireless earbuds are designed to provide listeners with a high-fidelity experience and features to customise listening sessions. Leveraging the 5.8 mm high-resolution drivers from the flagship ATH-TWX9, the ATH-TWX7 offer detailed music playback, including support for 24-bit/96 kHz audio files all within a compact and easily portable design. These earbuds also provide audio-controlling features accessible with a touch of the earbud sensor to activate the digital hybrid noise canceling technology.

Clear Calls Anywhere, Any Time

With beamforming microphones in each earbud, the ATH-TWX7 clearly captures your voice, even in noisy environments. Plus, you can choose from two call modes – Natural Mode (indoors/quiet) and Noise-Reduction Mode (outdoors/noisy) – to get the best audio quality anywhere.

Key Features

• Compact, truly wireless in-ear headphones with digital hybrid noise-cancelling technology
• Ambience control (noise-cancelling, hear-through, talk-through) can be employed for music playback and calls
• MEMS (micro-electromechanical system) mics, a high-accuracy noise-cancelling processor, and a proprietary filter work together to deliver stellar noise-cancelling performance
• Hear-through function allows you to hear ambient sounds (plus your own, unmuffled voice) so you can talk to others around you without removing your earbuds
• Talk-through function lets you hear voices/announcements around you by instantly lowering playback volume and capturing ambient sounds while enhancing the vocal bandwidth
• 5.8 mm high-resolution drivers, adopted from the ATH-TWX9, deliver an extended high-frequency range and improved sound detail
• LDAC codec compatibility enables playback of 24-bit/96 kHz audio files
• Includes two sets of eartips (XS/S/M/L): Soft eartips for greater comfort during long listening sessions and Standard eartips for a snugger, more secure fit
• High-performance MEMS mics, beamforming technology, and two selectable call modes (Natural and Noise-Reduction) ensure crystal-clear call quality
• Call test function allows you to check the tone and clarity of your voice

Technical Specifications

Earbuds

• Type: Dynamic
• Driver: Diameter 5.8mm
• Frequency Response: 10 - 40,000Hz
• Sensitivity: 100dB/mW
• Impedance: 16 ohms

Charging Time:

• Headphones：Approx. 1.5 hours*
• Charging case：Approx. 3 hours (USB charging), Approx. 5 hours (wireless charging).
• Operating Temperature: 5℃ - 40℃ (41℉ to 104℉)

Operating Time:

Continuous transmission time (music playback):

• Max. approx. 6.5 hours with ANC on and 7.5 hours with ANC off (Headphones),
• Max. approx. 20.0 hours with ANC on and 24.0 hours with ANC off (if charging case is used in combination)
• Microphone Type: MEMS type
• Microphone Sensitivity: -38dB（1V/Pa, at 1kHz）
• Microphone Polar Pattern: Omnidirectional

Power Supply:

• Headphones：DC3.85V lithium ion battery (built-in)
• Charging case：DC3.85V lithium ion battery (built-in)
• Water-Resistant (drip-proof) Performance: IPX4 (earbuds only)

Bluetooth

• Bluetooth® Version: Bluetooth Ver.5.1
• Operating Range: Line of sight - approx. 10 m (33')
• Maximum RF Output: 12mW EIRP
• Frequency Band: 2.4GHz band（2.402GHz～2.480GHz）
• Modulation Method: GFSK, Pi/4DQPSK, 8DPSK
• Spread Spectrum Method: FHSS
• Compatible Bluetooth Profiles: A2DP, AVRCP, HFP
• Support Codec: LDAC, AAC, SBC
• Supported Content Protection Method: SCMS-T
• Supported Sample Rates: 44.1kHz, 48kHz, 96kHz (When using LDAC codec)
• Supported Bit Rates: 16bit, 24bit (When using LDAC codec)
• Transmission Band:
• 10Hz - 47,000Hz (when LDAC 96kHz sampling),
• 20Hz - 20,000Hz

What's Included

• Earbuds
• Case
• USB charging cable (30 cm (12")
• USB Type-A / USB Type-C)
• Eartips: Soft (XS, S, M, L), Standard (XS, S, M, L)