Jim Dunlop MXR DD11 Dime Distortion Guitar Effects Pedal

The Dime Distortion delivers a heavy, aggressive, razor-sharp tone that rages with distortion.

This pedal can be powered by the included ECB004 18-volt adapter or the DC Brick™, Iso-Brick™ and Mini Iso-Brick™ power supplies.

FEATURES

• Thick, powerful distortion with superior definition
• Proprietary SCOOP switch notches mids for the heavily scooped Dime sound
• 3-band EQ provides huge tonal flexibility

SPECIFICATIONS

• Input Impedance 1 MΩ
• Output Impedance 3 kΩ
• Noise Floor* -89 dBV
• Bypass Hardwired
• Current Draw 14 mA
• Power Supply 18 volts DC

DIRECTIONS

• Run a cable from your guitar to the DD11’s INPUT jack and run another cable from the DD11’s OUTPUT jack to your amplifier.
• Start with all controls at 12 o’clock.
• Turn the effect on by depressing the footswitch.
• Push SCOOP switch to cut midrange at 1kHZ by -22dB for a scooped metal sound.
• Rotate the OUTPUT knob clockwise to increase volume or counterclockwise to decrease it.
• Rotate DISTORTION knob clockwise to increase amount of distortion or counterclockwise to decrease it.
• Rotate BASS knob clockwise to boost low frequencies or counterclockwise to cut them.
• Rotate MID knob clockwise to boost midrange frequencies or counterclockwise to cut them.
• Rotate TREB knob clockwise to boost high frequencies or counterclockwise to cut them.
• Rotate DISTORTION knob clockwise to increase amount of distortion or counterclockwise to decrease it.