The Commercial Solutions Series CSS-H15 Paging Horn provides excellent voice range clarity for public address systems, announcement/paging, intercom, security, alarm and industrial applications. Designed for demanding environmental conditions, the CSS-H15 is highly weather resistant (IP-65 rated) so it can be used in either indoor or outdoor applications. The wide coverage pattern allows the horn to cover a larger audience area than is the case with many paging horns.
FEATURES
- Excellent voice range clarity for announcement and paging.
- High sensitivity delivers high sound levels with minimal power amplification.
- Wide 70° horizontal by 90° vertical coverage for medium throw applications.
- Phenolic diaphragm driver for outdoor durability and high reliability.
- UL-registered 15-watt multi-tap transformer, with 8 ohm direct bypass.
- Built-in high-pass filter enhances reliability by protecting against low frequency damage.
- Highly weather-resistant, with stainless steel bracket and hardware.
- Applications :
- Public Access Areas
- Warehouses
- Factories
- Schools
- Recreational Facilities
- Commercial Buildings
- Distribution Centers
- Civic Centers
- Other Commercial Sound and Protective Signaling Systems
SPECIFICATIONS
- Frequency Range (-10dB)
- 400 Hz - 7.5 kHz
- Coverage Pattern
- 70 degrees horizontal by 90 degrees vertical
- Included High-Pass Filter
- Passive 350 Hz High-pass filter built-in to protect against damage from frequencies below operational range
- Directivity Factor (Q)
- 10.9 (2 kHz)
- Directivity Index (DI)
- 10.4 (2 kHz)
- System Power Rating
- 15W (60W peak), 100 hours
- Sensitivity
- (1W, 2.83V @ 1m) 105 dB, ave. 1 kHz - 6 kHz; 111 dB at 2 kHz
- Max. SPL
- 117 dB cont ave. (123 dB peak), 1 kHz - 6 kHz; 123 dB cont ave. (129 dB peak), 2 kHz, 15W input, 8 ohm setting
- Nominal Impedance
- 15W/70V, NC/100V tap: 333 ohms; 7.5W/70V, 15W/100V tap: 667 ohms; 3.8W/70V, 7.5W/100V tap: 1333 ohms; 1.9W/70V, 3.8W/100V tap: 2666 ohms; 0.9W/70V, 1.9W/100V tap: 5332 ohms; 8 ohms at 8 ohm direct setting
- Transformer Taps
- 70V: 15W, 7.5W, 3.8W, 1.9W, 0.9W; 100V: 15W, 7.5W, 3.8W, 1.9W
- Full-Range Driver
- 33 mm (1.3") diameter with phenolic diaphragm
- Horn Material
- ABS
- Mounting Hardware
- Stainless steel powder-coated U-bracket (yolk) with 3 x 8.8 mm (0.34 in) diameter mounting holes, stainless steel exterior hardware
- Color
- RAL 9016 (horn and bracket)
- Input Connection
- 300 mm (12") pigtail to bare wire; entrance via watertight fitting; wire colors: red = positive (+), black = negative (-)
- Environmental
- IP-65 rating per IEC529, salt spray per B117, stainless steel U-bracket and exterior hardware
- Safety Agency Certifications
- Transformer UL registered per UL1876 "Isolating signal and feedback transformers for use in electronic equipment"
- Dimensions
- (H x W x D) 163 x 222 x 232 mm (6.5 x 8.8 x 9.2") horn; 181 x 222 x 232 mm (7.1 x 8.8 x 9.2") including mounting bracket; Depth excludes cable exit
- Weight
- 3.0 lbs (1.4 kgs)
