Rode VideoMic Go Shotgun Microphone for Video Camera (VMGO) 2 Years Warranty
- Rycote® Lyre® shock mounting onboard
- All-new capsule with lower noise and higher sensitivity
- Broadcast recording quality condenser microphone
- Compact form factor (150mm/6” length)
- Ultra lightweight (85g/3oz)
- 9V battery powered - over 70 hours use (alkaline)
- Integrated shock mounting
- Integrated foam windscreen
- 5mm stereo mini-jack output (dual mono)
- Two step High Pass Filter (flat, 80Hz)
- Three position level control (-10dB, 0, +20dB)
- Camera shoe mount with 3/8” thread for easy boompole mounting
- 10 year extended warranty when you register your microphone
The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.
At the heart of the VideoMic Pro is an all-new 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.
The integrated Rycote® Lyre® based shock mounting system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera's preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera's comparatively low quality audio circuitry.
The microphone uses a standard sized shoe mount for on camera use, and features a 3/8" thread in the base of the mount for easy boom pole mounting.
The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.
The RØDE VideoMic is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
VIDEOMIC PRO SPECIFICATIONS
|
Acoustic Principle |
Line Gradient |
|
Active Electronics |
JFET impedance converter |
|
Capsule |
0.50" |
|
Address Type |
End |
|
Frequency Range |
40Hz - 20kHz (selected HPF @80) |
|
Output Impedance |
200Ω |
|
Maximum SPL |
134dBSPL |
|
Maximum Output Level |
6.9mV (@ 1kHz, 1% THD into 1KΩ load) |
|
Sensitivity |
-32.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
|
Equivalent Noise Level (A-weighted) |
14dBA |
|
Weight |
85g |
|
Dimensions |
100mmH x 75mmW x 170mmD |
- Rycote® Lyre® shock mounting onboard
- All-new capsule with lower noise and higher sensitivity
- Broadcast recording quality condenser microphone
- Compact form factor (150mm/6” length)
- Ultra lightweight (85g/3oz)
- 9V battery powered - over 70 hours use (alkaline)
- Integrated shock mounting
- Integrated foam windscreen
- 5mm stereo mini-jack output (dual mono)
- Two step High Pass Filter (flat, 80Hz)
- Three position level control (-10dB, 0, +20dB)
- Camera shoe mount with 3/8” thread for easy boompole mounting
- 10 year extended warranty when you register your microphone
The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.
At the heart of the VideoMic Pro is an all-new 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.
The integrated Rycote® Lyre® based shock mounting system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera's preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera's comparatively low quality audio circuitry.
The microphone uses a standard sized shoe mount for on camera use, and features a 3/8" thread in the base of the mount for easy boom pole mounting.
The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.
The RØDE VideoMic is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
VIDEOMIC PRO SPECIFICATIONS
|
Acoustic Principle |
Line Gradient |
|
Active Electronics |
JFET impedance converter |
|
Capsule |
0.50" |
|
Address Type |
End |
|
Frequency Range |
40Hz - 20kHz (selected HPF @80) |
|
Output Impedance |
200Ω |
|
Maximum SPL |
134dBSPL |
|
Maximum Output Level |
6.9mV (@ 1kHz, 1% THD into 1KΩ load) |
|
Sensitivity |
-32.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
|
Equivalent Noise Level (A-weighted) |
14dBA |
|
Weight |
85g |
|
Dimensions |
100mmH x 75mmW x 170mmD |
CHECK OUT OUR BEST SELLING
CHECK OUT OUR BEST SELLING
Customer Reviews
Received my order today.very good packaging and well wrapped..fast delivery within a week.keyboard were in excellent condition.thank you Zoso Music job well done guys..!!!
I got this because my previous shock mount broke & my current mic needs one to stay up.
Aside from being the cheapest option among the other sites, the product itself is built pretty well. I've bought other product from Gator Frameworks before so I knew that it was going to be worth the money.
The only issue I have with it is how the clips that you use to try to slot in the mic is a little too short as it was difficult to get it open. Other than that, it does what a shock mount does.
gitar sangat memuaskan,Sesuai untuk permulaan and gitar sound sgt memuaskan
Multiple functions and effect, even amp simulation and drum. The most worth buying multi effect under rm1000
Its between this and fender champion, and i absolutely love this crush 12. Maybe small in size but it punched well in volume. Nice clean tones and heavy distortion too. Recommended for practice amps or maybe small venue performance too.
Bought a different model at first but sold out and i replaced with this strat. Couldn't be happy, the guitar feels great, color, design, quality all good. What i love the most is the after sales service, had trouble in setting up the guitar after changing to heavier gauge and zoso helped me resetting it with no cost. Great service especially to Amin and Jack.
Genuine, no damage, easy to set, (obviously not set yet, probably still in factory setting), overall satisfied with the purchased. Will be shopping again in the future.
AWESOME !!! work with my DAW pretty well. Many things to explore
Amin was very patient and attentive in answering all my question. Quick turnaround and superb service.
Higly recommended 💪💪💪
I thank your team for the support rendered right from Selection to Delivery.
Great Work
Very good sound and suit to practice at home with built-in reverb effect it is owesome!
Thks bro only wait 5 hri arrival spport zosco music Malaysia give 5 bintang
Great product & wonderful customer service.Zoso Music highly recommended
I'm loving this keyboard controller! Works well with my Ableton DAW and the full sized keys are great.
Starting from purchase, after-purchase is so convenient!
NEED HELP CHOOSING?
Our Product Expert can help you choose music gear with confidence.
We do understand that buying music equipment can be complicated, confusing and frustrating. But don't worry, our Product Expert Ayang Daniel Johns is here to help. Being a musician himself, he knows about music equipment more than any of us at Zoso! Impeccable advice and based on experience suggestions, we can be sure you're going to have the right gear!
EmailCall UsWhatsApp