Rode NTG-2 Directional Shotgun Mic with Battery/Phantom Power (NTG2) 10 Years Warranty
- Broadcast sound quality
- Low noise circuitry
- Condenser transducer
- Rugged metal construction
- Two step High Pass Filter (Flat/80Hz)
- P48 phantom power or AA battery option
- Low handling noise
- Low weight - 161g (5.17 oz.)
- Includes mic clip, wind shield and zip case
- Ideal for professional applications within the film, video, television and production industries
- 10 year extended warranty when you register online at rodemic.com/warranty
The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.
Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.
In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video.
The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.
The RØDE NTG2 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
NTG2 SPECIFICATIONS
|
Acoustic Principle |
Line Gradient |
|
Active Electronics |
JFET impedance convertor with balanced transformer output |
|
Capsule |
0.50" |
|
Address Type |
End |
|
Frequency Range |
20Hz - 20kHz |
|
Output Impedance |
250Ω |
|
Maximum SPL |
131dBSPL |
|
Maximum Output Level |
6.9mV (@ 1kHz, 1% THD into 1KΩ load) |
|
Sensitivity |
-36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
|
Equivalent Noise Level (A-weighted) |
18dBA |
|
Power Options |
AA P48 |
|
Weight |
161.00g |
|
Dimensions |
280.00mmH x 22.00mmW x 22.00mmD |
|
Output |
XLR |
- Broadcast sound quality
- Low noise circuitry
- Condenser transducer
- Rugged metal construction
- Two step High Pass Filter (Flat/80Hz)
- P48 phantom power or AA battery option
- Low handling noise
- Low weight - 161g (5.17 oz.)
- Includes mic clip, wind shield and zip case
- Ideal for professional applications within the film, video, television and production industries
- 10 year extended warranty when you register online at rodemic.com/warranty
The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.
Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.
In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video.
The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.
The RØDE NTG2 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
NTG2 SPECIFICATIONS
|
Acoustic Principle |
Line Gradient |
|
Active Electronics |
JFET impedance convertor with balanced transformer output |
|
Capsule |
0.50" |
|
Address Type |
End |
|
Frequency Range |
20Hz - 20kHz |
|
Output Impedance |
250Ω |
|
Maximum SPL |
131dBSPL |
|
Maximum Output Level |
6.9mV (@ 1kHz, 1% THD into 1KΩ load) |
|
Sensitivity |
-36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
|
Equivalent Noise Level (A-weighted) |
18dBA |
|
Power Options |
AA P48 |
|
Weight |
161.00g |
|
Dimensions |
280.00mmH x 22.00mmW x 22.00mmD |
|
Output |
XLR |
CHECK OUT OUR BEST SELLING
CHECK OUT OUR BEST SELLING
Customer Reviews
I got this because my previous shock mount broke & my current mic needs one to stay up.
Aside from being the cheapest option among the other sites, the product itself is built pretty well. I've bought other product from Gator Frameworks before so I knew that it was going to be worth the money.
The only issue I have with it is how the clips that you use to try to slot in the mic is a little too short as it was difficult to get it open. Other than that, it does what a shock mount does.
gitar sangat memuaskan,Sesuai untuk permulaan and gitar sound sgt memuaskan
Multiple functions and effect, even amp simulation and drum. The most worth buying multi effect under rm1000
Its between this and fender champion, and i absolutely love this crush 12. Maybe small in size but it punched well in volume. Nice clean tones and heavy distortion too. Recommended for practice amps or maybe small venue performance too.
Bought a different model at first but sold out and i replaced with this strat. Couldn't be happy, the guitar feels great, color, design, quality all good. What i love the most is the after sales service, had trouble in setting up the guitar after changing to heavier gauge and zoso helped me resetting it with no cost. Great service especially to Amin and Jack.
Genuine, no damage, easy to set, (obviously not set yet, probably still in factory setting), overall satisfied with the purchased. Will be shopping again in the future.
AWESOME !!! work with my DAW pretty well. Many things to explore
Amin was very patient and attentive in answering all my question. Quick turnaround and superb service.
Higly recommended 💪💪💪
I thank your team for the support rendered right from Selection to Delivery.
Great Work
Very good sound and suit to practice at home with built-in reverb effect it is owesome!
Thks bro only wait 5 hri arrival spport zosco music Malaysia give 5 bintang
Great product & wonderful customer service.Zoso Music highly recommended
I'm loving this keyboard controller! Works well with my Ableton DAW and the full sized keys are great.
Starting from purchase, after-purchase is so convenient!
The product is working really great and i am really satisfied with the products that i bought from zoso music
NEED HELP CHOOSING?
Our Product Expert can help you choose music gear with confidence.
We do understand that buying music equipment can be complicated, confusing and frustrating. But don't worry, our Product Expert Ayang Daniel Johns is here to help. Being a musician himself, he knows about music equipment more than any of us at Zoso! Impeccable advice and based on experience suggestions, we can be sure you're going to have the right gear!
EmailCall UsWhatsApp